JAC A-CLASS, Manual

Page: 26 / 176

Note
If you believe the brake
encounters a failure, please
promptly contact JAC franchi
-sed aftersales service center
for a check. Driving your car
since a brake failure breaks
out is quite dangerous and
may cause casualty.
In case the brake system warning
lamp is on when the parking brake is
completely released, it indicates the
brake fluid level is too low or there is
other fault.
In such cases, perform the following
procedures:
1. Drive your vehicle off the lane and
park carefully.
2. Check the brake fluid level.
3. Fill the recommended brake fluid
Oil pressure warning lamp
Upon system failure due to not
enough engine oil pressure, the
engine oil warning lamp is enabled.
Under normal conditions, the engine
oil warning lamp is enabled after
ignition switch is turned to "ON" and
disabled after engine is started.
If the warning lamp works all the
time after engine is started or it
works during running, the car has
not enough engine oil or encounters
other failures. Under such a circums
-tance, stop your car to ensure
safety.
As for not enough engine oil or fuel,
replenish your car with a proper
amount of engine oil to start engine.
If the warning lamp still works after
the replenishment, please contact
Note
Stop driving at once upon
excessively lower engine oil
pressure. Otherwise, engine is
overheated and even suffers
from fire, thus burning drivers or
passengers. Please check eng
-ine oil and send your car for an
overhaul as soon as possible.
Tips
◎ Engine oil shortage possibly
damages engine. The repair due to
this is beyond the scope of warranty.
Please make sure engine oils are
replaced in conformity with the
warranty plan.
26
to the MAX mark. Refer to Chapter
VIII Maintenance and Service. JAC after-sales service center to
check system.