JAC A-CLASS, Manual

Page: 127 / 176

Tyre replacement must be carried
out
according to the correct
replacement mode as shown in the
following figure.
Do not use compact spare tyre for
replacement.
After tyre replacement, it shall adjust
inflation pressure of front and rear
tyres as indicated on tyre and load
information volume label. Make sure
all the wheel nuts are correctly
fastened.
Notes
Rust or dirt on wheels or wheel
connectors will loosen wheel
nuts in certain period later. The
wheel may break away from the
car and cause accident. When
replacing tyre, must remove any
rust and dirt on wheels or wheel
connectors. Under emergency
condition, you may remove such
rust and dirt with cloth or tissue.
However, if necessary, you
should clean all rust and dirt with
a scraper or wire brush later.
When to replace tyre
You may judge when to replace new
tyre according to indicator sign of
tyre wear. When tyre surface is
worn to 1.6mm or less, indicator
sign of tyre wear will be shown.
127