JAC A-CLASS, Manual

Page: 123 / 176

Note
Burnt fuse indicates circuit
failures. Serious circuit failures
exist if the new fuse is burnt
immediately after the accessory
switch is turned on. At this time,
please contact JAC franchised
after-sales service center for
diagnosis and repair.
If you are not sure whether the fuse
is still in good condition, please refer
to following steps.
1.Shut down engine and turn off all
electric switches.
2.Open fuse box, pull out every fuse
and check it (you can see a small clip
in fuse box)
3.If you find out a burnt fuse, you
should check all other fuses.
Install new fuse and ensure a match
between the fuse and the groove. If
you have no spare fuse, you should
buy a new one or get fuse of lower
ampere
from other temporarily
unused accessory ICD and fuse as
substitutes.
123