JAC A-CLASS, Manual

Page: 109 / 176

Check coolant
Engine coolant expansion kettle is
located within the engine compart
-ment on site of vehicle passen
-gers. For specific position, refer to
General Layout of Engine Compart
-ment.
Notes
If screwing coolant expansion
kettle cap or radiator cover
when the engine and the
radiator is hot, steam and hot
liquid may spray out and burn
you. Therefore, do not screw
the expansion kettle cap and
radiator cover when the engine
and the radiator are hot. The
vehicle must be parked on a flat
ground. After the engine is
cooled, coolant level shall be
between the upper limit (F) and
lower limit
(L) signs of the
coolant expansion kettle. When
the engine reaches the strength
of normal work, the level will
rise. And after the engine is
cooled, the level will drop again.
109
If you need to fill coolant for more
than 4 times within a year, you
should have the cooling system of
your car checked by JAC authorized
after-sale service center for saloon
car.
If you have used effective coolant,
you don't need to add inhibitor or
additive that may improve cooling
system performance. Such inhibitor
is not good for the system.
In the event of mixed use of
them, there may be chemical
reaction among various addit
-ives, thus causing the additive
invalid.