JAC A-CLASS, Manual

Page: 24 / 176

24
Engine inspection EPC
As a component of the car diagn
-ostic system, the lamp is able to
monitor
engine failures. The
indicator lamp is enabled after igniti
-on switch is turned to "ON" and
disabled after engine is started.
If the lamp is enabled during running
or doesn't work after ignition switch
is turned to "ON", please contact
JAC franchised after-sales service
center for a check as soon as poss
-ible.
Note
Do not drive the vehicle with
malfunction indicator lamp being
on.
The indicator lamp will indicate
the malfunction requiring your
attention. Driving with malfun
-ction indicator lamp being on
will damage the emission control
system and impact the fuel
economical efficiency and vehic
-le operability.
Please have your vehicle repa
-ired in the nearest JAC author
-ized after service center as so
-on as possible.
enabled. Thus, fill the tank with fuels
as soon as possible. When fuel
warning lamp is enabled or fuel level
is lower than "E", running the car
may undergo an engine miss and
damage catalytic converter.
Leftandrightsteeringindication
The steering signal indicator lamp is
used to check whether the exterior
steering signal lamp operation is
normal.
In case the green arrowhead does
not twinkle when you release
steering signal or press the danger
warning button, check the fuse and
bulb and replace
them where
necessary.
Automatic transmission mode indica
-torlamp
For vehicle equipped with AMT, this
lamp will be on when the automatic
transmission mode is enabled.
AUTO