JAC A-CLASS, Manual

Page: 155 / 176

Maintenance of SRS
◇ SRS is actually a system requiring
no maintenance. If failure occurs,
please
contact JAC authorized
after-sales service shop for repair.
◇ Removal, installation and repair of
SRS system must be performed by
the authorized after-sales service
shop or specialized person. Inapprop
-riate repair may cause severe
safety risk.
◇ Wash the position at which the
airbag is located with clean cloth and
clean water. Do not use chemical
detergent of unknown compositions.
◇ Do not place air freshener in the
vehicle, especially on the console.
Entry of unknown chemical substa
-nces into instruments and ventila
-tion system may damage these
parts.
Note
Collision accident may damage
the protection system in the
vehicle.
If the protection
system is damaged, it cannot
provide protection, which may
cause severe injury and death
in accidents. In order to confirm
whether the protection system
can work normally, check and
replace it timely.
◇ No replacement is necessary
after light collision. It is needed
to replace components if the
safety belt has been pulled in
severe collision accidents.
◇ If the front airbag is inflated,
you also need to replace the
airbag and safety belt of the
driver and assistant driver. You
155
must do this. Only by doing so,
new pre-tensioner and safety
belt can provide protection in the
event of collision accidents.
◇ If an airbag is inflated, you
must replace airbag components.
After collision, replace the
components of protection
system.