www.ecoological.com ©2017 ECOOLOGICAL LLC AB Standard Assembly 10-2017
©2017 Ecoological
10/2017
Installation Manual-Standard
-INSTALLATION TIME-
Approximate installation time: 30-45 minutes, based on installer
-TOOLS REQUIRED-
-PARTS INCLUDED-
Read all instructions before installing or using this product. The AeroBox™ will fit most full
-size truck beds
that have >58.5 inch tailgate opening, including liner thickness. Please view our helpful installation video and
FAQ’s on our website
, or call customer service at (844) 918-3688 if you have additional questions. Any
modification or unintended use of this product shall immediately vo
id all manufacturer’s warranties. The
manufacturer disclaims all liability for injuries to persons or property resulting from any modifications to,
unintended use, or improper assembly of this product.
AEROBOX™ WHEEL INSTALLATION
1.
Place AeroBox™ upside down on clean surface
2.
Locate the threaded inserts in the wheel pocket
3.
Insert the axle (wheel bolt) through the bearing on the
wheel and thread in to the threaded insert using ½ inch
wrench or socket until tight. Do not overtighten.
4.
Repeat for remaining wheel.
•
Phillips screwdriver
•
5/16
”
-18 x 1.5
”
bolt and washer
•
Center punch
•
Drill
•
5/16
”
and 1/2
”
wrenches or sockets
•
9/64
”
, 3/8
”
, 1/2
”
drill bits
-
St
andard AeroBox™, complete with door, (2) keyed cam locks, a
nd load floor
Kit #1: All Assemblies
–
Wheels
•
(
2
) Wheels
•
(
2
) Axle bolts
•
(
2
) Main door keys
Kit #3C: Standard Assembly
–
Hardware
•
(
2
) 5/16-18 x 2 in. thumb screws
•
(
2
) 5/16-
18 Nylock™ flanged nuts
•
(
2
) Threaded rivet inserts
•
(
1
) Threaded insert install tool
Kit #3B: Standard Assembly
–
Rubber Feet
•
(
4
) Rubber Feet
•
(
4
) #6-32 X ¾ inch screws for rubber feet
•
(
4
) #6-32 hex nuts and (4) #6 split washer
1.
While in upside down position, drill 9/64 inch hole at the center mark of each foot location
2.
Position AeroBox™ with d
oor side up
3.
Insert #6 X ¾ inch machine screw through the bumper foot and through drilled hole.
4.
Install s
plit washer and nut on to screw by accessing through AeroBox™ door
opening
5.
Repeat for remaining bumper feet
Note:
Rubber feet help keep AeroBox from sliding. In some cases, you may prefer to
leave off rubber feet for easier sliding.
RUBBER FEET INSTALLATION
