REL0.2
Page 80 of 88
Zynq Ult MPSoC SBC Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
3.
TECHNICAL SPECIFICATION
This section provides detailed information about the Zynq Ult MPSoC SBC technical specification with
Electrical, Environmental and Mechanical characteristics.
3.1
Power Input Requirement
The Zynq Ult MPSoC SBC is designed to work with 12V external power and uses on board voltage regulators
for internal power management. 12V power input from an external power supply is connected to the Zynq Ult
MPSoC SBC through Power Jack (J18). This connector is physically placed at the top of the board as shown below.
Figure 22: Input Power Jack
The below table provides the Power Input Requirement of Zynq Ult MPSoC SBC .
Table 15: Power Input Requirement
Sl. No.
Power Rail
Min (V)
Typical (V)
Max(V)
Max Input Ripple
1
VCC_12V
11.75V
12V
12.25V
±50mV.
