iWave iW-G36S-2CG1-4E002G-E008G-BEA, Hardware User'S Manual

Page: 30 / 88

REL0.2
Page 30 of 88
Zynq Ult MPSoC SBC Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
Table 5: M.2 Connector Pin Assignment
Pin
No
Pin
Name
MPSoC Pin
Name
MPSoC
Bank
MPSoC
Pin No
Signal Type/
Termination
Description
1 CONFIG_3 NA NA NA NA M.2 Configuration Pin 3.
2 VCC_3V3 NA NA NA O, 3.3V
Power
Supply Voltage.
3 GND NA NA NA Power Ground.
4 VCC_3V3 NA NA NA O, 3.3V
Power
Supply Voltage.
5 GND NA NA NA Power Ground.
6 FULL_CARD_P
OWER_OFF# NA NA NA O, 3.3V
CMOS/
10K PU FULL_CARD_POWER_OFF#
This signal is configuring from
PMIC GPIO13 (U14).
7 USB_D+ NA NA NA IO, USB USB2.0 Port3 USB data positive.
This pin is connected from 17
th
pin
of 4-Port USB HUB(U33).
8 W_DISABLE1# NA NA NA O, 3.3V
CMOS/
10K PU M.2 Wireless Disable Signal
This signal is configuring from
PMIC GPIO2 (U14).
9 USB_D- NA NA NA IO, USB USB2.0 Port3 USB data negative.
This pin is connected from 18
th
pin
of 4-Port USB HUB(U33).
10 GPIO9 NA NA NA NA NC.
11 GND NA NA NA Power Ground
12 B1 NA NA NA NA NC.
13 B2 NA NA NA NA NC.
14 B3 NA NA NA NA NC.
15 B4 NA NA NA NA NC.
16 B5 NA NA NA NA NC.
17 B6 NA NA NA NA NC.
18 B7 NA NA NA NA NC.
19 B8 NA NA NA NA NC.
20 GPIO5 NA NA NA NA NC.
21 CONFIG_0 NA NA NA NA M.2 Configuration Pin 0.
22 GPIO6 NA NA NA NA NC.
23 GPIO11 NA NA NA NA NC.
24 GPIO7 NA NA NA NA NC.
25 DPR NA NA NA O, 1.8V
CMOS
M.2
Dynamic Power Reduction
Signal.
This signal is configuring from
PMIC GPIO1 (U14).
26 GPIO10 NA NA NA NA NC.
27 GND NA NA NA Power Ground.
28 GPIO8 NA NA NA NA NC.