REL0.2
Page 43 of 88
Zynq Ult MPSoC SBC Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
2.9
Board to Board Connector1
The Zynq Ult MPSoC SBC supports three 60 pin high speed ruggedized terminal strip connectors, Three 60pin
High performace High Density connector for interfaces expansion. All the effort is made in Zynq Ult MPSoC
SBC design to provide the maximum interfaces of Zynq Ult MPSoC to SBC by adding these three Board to Board
Connectors.
The Zynq Ult MPSoC SBC Board to Board Connector1 pinout is provided in the below table and the interfaces
which are available at Board to Board Connector1 are explained in the following sections. The Board to Board
Connector1 (J21) is physically located on bottom side of the SBC as shown below.
Number of Pins
- 60
Connector Part Number - TFC-130-11-L-D-A
Mating Connector
- SFC-130-T1-L-D-A from Samtech
Staking Height
- 7.75mm
Figure 19: Board to Board Connector1
