iWave iW-G36S-2CG1-4E002G-E008G-BEA, Hardware User'S Manual

Page: 8 / 88

REL0.2
Page 8 of 88
Zynq Ult MPSoC SBC Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
1. INTRODUCTION
1.1 Purpose
This document is the Hardware User Guide for the Zynq Ult MPSoC Single Board Computer based on the Xilinx
Zynq Ult MPSoC . This board is fully supported by iWave Systems Technologies Pvt. Ltd. This Guide provides
detailed information on the overall design and usage of the Zynq Ult MPSoC SBC from a Hardware Systems
perspective.
1.2 SBC Overview
The Zynq Ult MPSoC SBC is an extension of Zynq Ult MPSoC. Zynq Ult MPSoC SBC has a form
factor of 72mm x 100mm and provides the functional requirements for an embedded application. Three high speed
ruggedized terminal strip connectors provide the interface to carry all the I/O signals from Zynq Ult MPSoC.
1.3 List of Acronyms
The following acronyms will be used throughout this document.
Table 1: Acronyms & Abbreviations
Acronyms
Abbreviations
ADC Analog to Digital Converter
ARM Advanced RISC Machine
BSP Board Support Package
CAN Controller Area Network
CPU Central Processing Unit
DDR4 SDRAM Double Data Rate fourth-generation Synchronous Dynamic Random Access Memory
FPGA Field Programmable Gate Array
eMMC Embedded Multimedia Card
GB Giga Byte
Gbps Gigabits per sec
GEM Gigabit Ethernet Controller
GHz Giga Hertz
GPIO General Purpose Input Output
I2C Inter-Integrated Circuit
IC Integrated Circuit
JTAG Joint Test Action Group
Kbps Kilobits per second
LVDS Low Voltage Differential Signalling
MAC Media Access Controller
MB Mega Byte
Mbps Megabits per sec
MHz Mega Hertz