iPECS iPECS-LIK Feature Description & Operation Download Page 178

Page: 178 / 447

iPECS-LIK
Feature Description & Operation Manual

Issue 6.0d1

165

Operation

Conditions

1. The number of groups and member stations per group are given in Table 1.2-1.

2. Station Group calls are not routed to member stations that are in DND.

3. When a member of a Circular, Terminal, or Ring Group activates Call Forward, calls

to the group may still route to the member based on the Member Forward option.

4. A call transferred to a Station Group will follow the routing for the group and will not

initiate the Transfer Recall process.

5. Calls to a Station Group receive either ring-back tone or MOH while queued to the

group.

6. Calls, which are not answered in the Overflow time, are routed to the defined

Overflow destination, station, group, etc. If no Overflow destination is defined, the
call is dropped after expiration of the Overflow timer.

7. One of the 70 VMIM/VSF announcements may be assigned as the Overflow

destination. These announcements allow for Caller Controlled Routing.

Programming

STATION GROUPS

1 Station Group Assignment (PGM 190)

2 Station Group Attributes (PGM 191)

3 Pickup Group (PGM 192)

Related Features



Automatic Call Distribution



External Auto Attendant/Voice Mail



Group Call Pick-Up



MOH (Music-On-Hold)



VMIM/VSF Integrated Auto Attd/Voice Mail

Hardware

Summary of Contents for iPECS-LIK
































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands

iPECS iPECS-LIK, Feature Description & Operation

Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands