iPECS iPECS-LIK Feature Description & Operation Download Page 363

Page: 363 / 447

iPECS-LIK
Feature Description & Operation Manual

Issue 6.0d1

350

Conditions

1. The

{LOOP}

and

{POOL}

buttons provide a status indication for the call as long as

the station has supervisory control.

2. If there is no available

{CO}/{IP}

{LOOP}

{POOL}

button for a call, the station will

not ring for an incoming CO/IP call; transfers to the station immediately recall the
initiator and recalls are routed directly to the Attendant.

3. A station may have multiple

{LOOP}

and

{POOL}

buttons.

4. When all CO Lines in a group are busy, any

{POOL}

buttons associate with the

group will show busy, otherwise,

{POOL}

buttons will only display the status of an

activate call.

{POOL}

buttons will access a CO Line from the designated group using the Round

Robin or Last Used method as assigned in the database.

6. The priority for the appearance of a CO call transfer is first a direct CO Line

appearance (

{CO}/{IP}

button), if not available a

{LOOP}

appearance is employed,

if not available a

{POOL}

appearance is used. If there is no appearance available,

the transferring station recalls immediately.

7. Station User Program Codes are defined in section 5.24.

Programming

NUMBERING

1 Flexible Numbering Plan (PGM 105~109)

STATION

1 Flexible Button Assignment (PGM 115)

Related Features



Flexible Numbering Plan



Station User Programming & Codes

Hardware



iPECS Phone

Summary of Contents for iPECS-LIK
































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands

iPECS iPECS-LIK, Feature Description & Operation

Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands