iPECS iPECS-LIK Feature Description & Operation Download Page 351

Page: 351 / 447

iPECS-LIK
Feature Description & Operation Manual

Issue 6.0d1

338

5.16 MUTE

Description

An iPECS Phone can turn off audio transmission from the handset, speakerphone or headset
microphone, “Mic Mute”.

Operation

iPECS Phone

To Mute the Microphone;

1. Press the

[MUTE]

button, the

[MUTE]

button LED is on and the microphone

(Handset, Speakerphone, Headset) is muted; the connected party receives silence.

To activate the microphone;

1. Press the illuminated

[MUTE]

button, the

[MUTE]

button LED is off, and the

microphone is activated, transmitting audio to the connected party.

Conditions

1. Changing from speakerphone to handset or vice versa during a mute condition will

eliminate the mute status.

2. Returning to idle or placing another CO/IP or intercom call will change the mute

status to its normal (active microphone) condition.

Programming

STATION

1 Headset Ring (PGM 111-Btn 8)

2 Speakerphone (PGM 111-Btn 9)

Related Features



Speakerphone



Group Listening



Headset Compatibility

Hardware



iPECS Phone

Summary of Contents for iPECS-LIK
































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands

iPECS iPECS-LIK, Feature Description & Operation

Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands