iPECS iPECS-LIK Feature Description & Operation Download Page 388

Page: 388 / 447

iPECS-LIK
Feature Description & Operation Manual

Issue 6.0d1

375

6.9 CALL/QUEUING

Description

Any station can call the Attendan

t by dialing the Attendant Call code “0”. When an Attendant

call experiences a busy, the call is queued to the Attendant group. The call will be delivered to
the first available Attendant.

Operation

To call the Attendant

Dial “0”, the Attendant Call Code.

Condition

1. Call routing order follows the order of entry in the Attendant Assignments program.

2. The Attendant is informed of a queued Attendant call by the [HOLD] button LED

flashing. The calling intercom party will receive ring-back tone or MOH, as
specified.

Calls to the Attendant’s station intercom number are sent to the Attendant station

dialed as with any intercom call.

4. When an attendant calls another busy attendant by dialing station number, busy

tone is received and camp-on is available.

Programming

SYSTEM

1 Attendant Assignment (PGM 164)

2 MOH (PGM 171-Btn 2)

3 Attendant Call Queuing Tone (PGM 160-Btn 1)

Related Features



Attendant Positions



Intercom Call (ICM Call)

Hardware

Summary of Contents for iPECS-LIK
































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands

iPECS iPECS-LIK, Feature Description & Operation

Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands