iPECS iPECS-LIK Feature Description & Operation Download Page 57

Page: 57 / 447

iPECS-LIK
Feature Description & Operation Manual

Issue 6.0d1

1. Lift the handset or press

[SPEAKER]

button to receive dial-tone

2. Press the

[FWD]

button,

Dial Call Forward code “0”,

Dial the station’s Authorization Code (Station password),

Dial Forward condition (“1”~“4”),

6. Dial the destination station or station group,

Dial CO access code (9, 8xx, 88xx) and desired external phone number.

Press

[SAVE]

button to save.

Press

[SPEED]

button

Dial desired bin number

7. Replace the handset, return to idle.

To deactivate Call forward

1. Press flashing

[FWD]

button, Call Forward will deactivate and the

[FWD]

button

LED is off.

SLT

To activate Call Forward, Unconditional, Busy/No-Answer to an internal number

1. Lift the handset to receive dial tone.

Dial Call Forward feature dial code “554”

Dial desired Call Forward code (“1”~“4”).

4. Dial the destination station, station group or dial CO access code (9, 8xx, 88xx) and

desired external phone number.

5. Momentarily press the hook-switch, receive confirmation tone.

6. Replace the handset, return to idle.

To activate Call Forward to a Speed number

1. Lift the handset to receive dial tone.

Dial Call Forward feature access dial code “554”.

Dial Call Forward code (“6”~“9”),

4. Dial Speed Dial bin number.

5. Replace handset to return to idle.

To activate Call Forward, Remote (Follow-me)

1. Lift the handset.

Dial the Call Forward feature code “554”.

Dial Remote Forward code “0”

Dial the station’s Authorization Code (S Password),

5. Di

al Forward condition (“1”~“4”)

6. Dial the destination station, station group .or dial CO access code (9, 8xx, 88xx) and

desired external phone number.

7. Momentarily press the hook-switch, receive confirmation tone.

8. Replace handset return to idle.

To deactivate the Call forward

1. Lift the handset, receive stutter dial-tone,

Summary of Contents for iPECS-LIK
































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands

iPECS iPECS-LIK, Feature Description & Operation

Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands