iPECS iPECS-LIK Feature Description & Operation Download Page 101

Page: 101 / 447

iPECS-LIK
Feature Description & Operation Manual

Issue 6.0d1

Programming

STATION

1 Station COS (PGM 116)

CO/IP

1 CO COS (PGM 141-Btn 2)

SYSTEM

1 DISA COS (PGM 166)

2 PBX Trunk Access Codes (PGM 172)

3 LD Digit Count (PGM 177-Btn 4)

4 LD Digit Code (PGM 177-Btn 19)

TABLES

1 Toll Restriction (PGM 224)

2 Authorization Codes Table (PGM 227)

Related Features



Authorization Codes (Password)



Class of Service



Direct Inward System Access (DISA)



Temporary Station COS/Lock



Walking COS



Auto Service Mode Control



Day/Night/Timed/Scenario Ring Mode

Hardware

2.31.3 Temporary Station COS/Lock

Description

A user or an Attendant can change the Station’s Class of Service to COS 7, temporarily
preventing unauthorized toll dialing f

rom the station, i.e. “lock the station”. The station is still

allowed to place internal calls and Emergency number calls.

Operation

iPECS Phone

To activate Temporary COS

1. Press the

[PGM]

button.

Dial “21”, the Temp COS code.

3. Press the

[SAVE]

button.

To restore the assigned COS

1. Press the

[PGM]

button.

Dial “22”, the restore COS code.

3. Dial Authorization Code (station number and code).

4. Press the

[SAVE]

button.

Summary of Contents for iPECS-LIK
































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands

iPECS iPECS-LIK, Feature Description & Operation

Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands