iPECS iPECS-LIK Feature Description & Operation Download Page 331

Page: 331 / 447

iPECS-LIK
Feature Description & Operation Manual

Issue 6.0d1

318

2. The call will be placed on the same path as originally used. If the path is busy, an

available CO/IP line in the same group will be seized.

3. The ACNR Retry Counter decrements by one when the system completes the

dialed number.

4. When the ACNR Pause Timer expires, if the station is in a busy state, the ACNR

Delay Timer is invoked.

5. Upon completion of dialing, the system will monitor the call for progress signals.

6. To preserve ACNR feature in activated state, SLT user does not go On-Hook.

7. While ACNR dialing or waiting state, if SLT user goes On-Hook, then SLT ACNR is

deactivated, automatically.

8. During ACNR dialing SLT, cannot receive any new call.

Programming

SYSTEM

1 ACNR Delay Timer (PGM 180-Btn 8)

2 ACNR Pause Timer (PGM 180-Btn 9)

3 ACNR Retry Counter (PGM 180-Btn 10)

4 ACNR Tone Detect Timer (PGM 180-Btn 11)

NUMBERING PLAN

1 SLT ACNR Code (PGM 109-Btn 18

– 58#)

Related Features



LNR (Last Number Redial)



Speakerphone



Mute

Hardware

• iPECS Phone

Summary of Contents for iPECS-LIK
































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands

iPECS iPECS-LIK, Feature Description & Operation

Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands