iPECS iPECS-LIK Feature Description & Operation Download Page 127

Page: 127 / 447

iPECS-LIK
Feature Description & Operation Manual

Issue 6.0d1

114

To access a call on Exclusive Hold from the holding station

1. Lift the handset or press the

[SPEAKER]

button.

2. Press the held CO/IP line.

Or,

Dial “8#”, the Held CO/IP Call Access code.

2. Dial the CO/IP line number.

SLT

To place a call on Exclusive Hold

1. Momentarily press the hook-switch.

To access a call on Exclusive Hold from the holding SLT

1. Lift the handset.

Dial “8#”, the Held CO/IP Call Access code.

3. Dial the CO/IP line number.

Conditions

1. When a CO/IP line is placed on Exclusive Hold, the button LED will flash at 120 ipm

at the holding station and will be On at all other stations.

2. All Transferred CO/IP calls are placed on Exclusive Hold for the receiving station.

3. The LED of

{LOOP}

and

{POOL}

buttons will display the CO/IP line status.

Programming

SYSTEM

1 Hold Preference (PGM 160-Btn 7)

2 Attendant Recall Timer (PGM 180-Btn 1)

3 Exclusive Hold Recall Timer (PGM 180-Btn 4)

4 I-Hold Recall Timer (PGM 180-Btn 5)

5 Transfer Hold Recall Timer (PGM 180-Btn 7)

Related Features



Call Transfer, CO/IP



Hold Preference



Hold Recall



System Hold

Hardware

Summary of Contents for iPECS-LIK
































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands

iPECS iPECS-LIK, Feature Description & Operation

Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands