iPECS iPECS-LIK Feature Description & Operation Download Page 186

Page: 186 / 447

iPECS-LIK
Feature Description & Operation Manual

Issue 6.0d1

173

Conditions

When the Lost Call Count is reset, the SMDR port will provide a “count reset”

message.

2. Individual Lost Call records are only available in real-time and not on-demand.

“Print Incoming Calls” and “Print Lost Calls” must be enabled in the SMDR

Attributes for the system to output real-time Lost Call records and for the Lost Call
Count summary report.

4. The fields of a Lost Call Record are the same as a normal SMDR Call Record.

Programming

SYSTEM 1 SMDR Attributes (PGM 177)

Related Features



Call Cost Display



SMDR Call Records



Traffic Analysis

Hardware



RS-323 device to capture SMDR

Summary of Contents for iPECS-LIK
































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands

iPECS iPECS-LIK, Feature Description & Operation

Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands