iPECS iPECS-LIK Feature Description & Operation Download Page 294

Page: 294 / 447

iPECS-LIK
Feature Description & Operation Manual

Issue 6.0d1

281

Conditions

1. Conditions associated with Internal/External & All Call Page apply to Push to Talk

paging.

2. To access PTT paging, the station must be permitted access to system paging,

PGM CODE 111, button 7.

3. If allowed access to all PTT groups, a station may log-into all groups (PTT group 0)

to place announcements to all groups simultaneously and receive announcements
from any group.

4. A station can only login to PTT groups to which it is assigned as a member.

5. The station must have a {PTT} to place or receive PTT announcements. As a

default, the iPECS WLAN phone is assigned a PTT button.

6. The station may be assigned and logged in to the default active PTT group in the

system database.

Programming

NUMBERING

1 PTT Log-in/out Code (PGM 109-Btn 4)

STATION

1 Page Access (PGM 111-Btn 7)

2 Default Active PTT Group (PGM 111-Btn 16)

3 PTT Group Access (PGM 119)

Related Features



Paging

Hardware



iPECS Phone



iPECS WLAN



iPECS Phontage



iPECS UCS Client

Summary of Contents for iPECS-LIK
































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands

iPECS iPECS-LIK, Feature Description & Operation

Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands