iPECS iPECS-LIK Feature Description & Operation Download Page 241

Page: 241 / 447

iPECS-LIK
Feature Description & Operation Manual

Issue 6.0d1

228

Operation

The main menu prompt will be modified to add “for personal options press 5”

Main Menu

for personal options, press five

Step 1

From the main menu press [5]

The prompt will state “to edit a list press 1”

Step 2

Press [1]

The prompt will state “Enter list number [1-5]”

Step 3

Press [1-5]

The prompt will state “to a edit list, press 1, to delete a list, press 2”

Step 4

The prompt will state “to add a mailbox press 1, to delete a mailbox press 2, to listen
to mailboxe

s in list, press 3”

Step 4-1

Press [1] (Add mailbox from list)

The prompt will state “Please enter the mailbox number”
The prompt will state “mailbox XXX added”

Repeat steps 3 to 3-1 until done.

Step 4-2

Press [2] (Delete mailbox from list)

The prompt will

state “Please enter the mailbox number”

The prompt will state “mailbox XXX deleted”

Step 4-3

Press [3] (Listen list)

The prompt will state “mailbox XXX”

Repeat steps 3 to 4-3 until done.

Conditions

1. The maximum number of mailboxes in a distribution list is 25.

Programming

Related Features

Hardware

Summary of Contents for iPECS-LIK
































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands

iPECS iPECS-LIK, Feature Description & Operation

Search results

Summary of Contents for iPECS-LIK

Reviews:

Related manuals for iPECS-LIK

Brands by name

Popular brands