Goodrive350 series high-performance multifunction VFD
Function parameter list
-213-
Function
code
Name
Description
Default
value
Modify
current)
P13.01
Initial pole
detection mode
0: No detection
1: High-frequency current injection
2: Pulse superimposition
0
◎
P13.02
Pull-in current 1
Pull-in current is the pole position orientation
current; pull-in current 1 is valid within the lower
limit of pull-in current switchover frequency
threshold. If you need to increase the starting
torque, increase the value of this function code
properly.
Setting range: 0.0%
–100.0% (of the motor rated
current)
20.0%
○
P13.03
Pull-in current 2
Pull-in current is the pole position orientation
current; pull-in current 2 is valid within the upper
limit of pull-in current switchover frequency
threshold, and you do not need to change pull-in
current 2 under common situations.
Setting range: 0.0%
–100.0% (of the motor rated
current)
10.0%
○
P13.04
Pull-in current
switchover
frequency
0.0%
–200.0%
(of the motor rated current)
20.0%
○
P13.05
High-frequency
superposition
frequency
(reserved)
/
/
/
P13.06
Pulse current
setting
This parameter is used to set the pulse current
threshold when the initial magnetic pole position is
detected in the pulse mode. The value is a
percentage in relative to the rated current of the
motor.
Setting range: 0.0
–300.0% (of the motor rated
voltage)
100.0%
◎
P13.07
Reserved
/
/
/
P13.08
Control
parameter 1
0x0000
–0xFFFF
0x0000
○
P13.09
Frequency
threshold of
This parameter is used to set the frequency
threshold for enabling the counter-electromotive
50.00
○
