Goodrive350 series high-performance multifunction VFD
Product overview
-11-
Function description
Specification
voltage drop
transiently drops.
Motor switchover
Supports two groups of motor parameters to control
motor switchover.
Peripheral
interface
Terminal analog input
resolution
No more than 20mV
Terminal digital input
resolution
No more than 2ms
Analog input
Two inputs. AI1: 0
–10V/0–20mA; AI2: -10–10V
Analog output
One output. AO1: 0
–10V/0–20mA
Digital input
Four regular inputs; max. frequency: 1kHz; internal
impedance: 3.3k
Ω
Two high-speed inputs; max. frequency: 50kHz; supports
quadrature encoder input; with speed measurement
function
Digital output
One high-speed pulse output; max. frequency: 50kHz
One Y terminal open collector output
Relay output
Two programmable relay outputs
RO1A: NO, RO1B NC, RO1C: common
RO2A: NO, RO2B: NC, RO2C: common
Contact capacity: 3A/AC250V, 1A/DC30V
Extension interface
Three extension interfaces: SLOT1, SLOT2, and SLOT3
(only on the control boards of 7.5kW and higher VFD
models)
Expandable PG card, programmable expansion card,
communication card, I/O card, and so on
Others
Installation mode
Supports wall mounting, floor mounting and flange
mounting.
Temperature of running
environment
-10
–50°C; Derating is required when the ambient
temperature exceeds 40°C.
IP rating
IP20
Pollution degree
Degree 2
Cooling mode
Forced air cooling
Braking unit
For 380V 37kW and lower: standard part, already built in
For 380V 45kW
–110kW (inclusive): optional part, built-in
only
For all 660V models: optional part, externally connected
only
EMC filter
The conductivity and transmission of all 380V VFD
models can meet the IEC61800-3 C3 requirements.
