Infineon TLE984 QX Series, User Manual

Page: 670 / 972

User Manual 670 Rev. 1.1
2019-03-18
TLE984xQX
Microcontroller with LIN and Power Switches for Automotive Applications
High-Speed Synchronous Serial Interface SSC1/SSC2
21.5 SSC Kernel Registers
There are two SSC kernels in the TLE984xQX, namely SSC1 and SSC2. Table 350 shows the SSC module base
addresses.
The registers are addressed wordwise.
21.5.1 Port Input Select Register
Port Input Select Register
The PISEL register controls the receiver input selection of the SSC module. In the implementation of
TLE984xQX, the PISEL register is not used.
Table 350 Register Address Space
Module Base Address End Address Note
SSC1 48024000
H
48025FFF
H
Synchronous Serial Interface 1
SSC2 48026000
H
48027FFF
H
Synchronous Serial Interface 2
Table 351 Register Overview
Register Short Name Register Long Name Offset Address Reset Value
SSC Kernel Registers , Port Input Select Register
SSC_PISEL Port Input Select Register 00
H
0000 0000
H
SSC Kernel Registers , Configuration Register
SSC_CON Control Register 04
H
0000 0000
H
SSC_ISRCLR Interrupt Status Register Clear 14
H
0000 0000
H
SSC Kernel Registers , Baud Rate Timer Reload Register
SSC_BR Baud Rate Timer Reload Register 10
H
0000 0000
H
SSC Kernel Registers , Transmitter Buffer Register
SSC_TB Transmitter Buffer Register 08
H
0000 0000
H
SSC Kernel Registers , Receiver Buffer Register
SSC_RB Receiver Buffer Register 0C
H
0000 0000
H
SSC_PISEL Offset Reset Value
Port Input Select Register 00
H
see Table 352