Infineon TLE984 QX Series, User Manual

Page: 766 / 972

User Manual 766 Rev. 1.1
2019-03-18
TLE984xQX
Microcontroller with LIN and Power Switches for Automotive Applications
10-Bit Analog Digital Converter (ADC1)
SAMPLE_TIME_HVCH 11:8 rw Sample time of ADC1
Note: the absolute sampling time of a High Voltage
Channel should not be choosen lower than 2 us.
Otherwise it is not ensured that the settling time
of the input signal is long enough.
0
H
MICLK4 , 4 ADC1_CLK clock periods
1
H
MICLK6 , 6 ADC1_CLK clock periods
2
H
MICLK8 , 8 ADC1_CLK clock periods
3
H
MICLK10 , 10 ADC1_CLK clock periods
4
H
MICLK12 , 12 ADC1_CLK clock periods (default)
5
H
MICLK14 , 14 ADC1_CLK clock periods
6
H
MICLK16 , 16 ADC1_CLK clock periods
7
H
MICLK18 , 18 ADC1_CLK clock periods
8
H
MICLK20 , 20 ADC1_CLK clock periods
9
H
MICLK22 , 22 ADC1_CLK clock periods
A
H
MICLK4 , 4 ADC1_CLK clock periods
B
H
MICLK4 , 4 ADC1_CLK clock periods
C
H
MICLK4 , 4 ADC1_CLK clock periods
D
H
MICLK4 , 4 ADC1_CLK clock periods
E
H
MICLK4 , 4 ADC1_CLK clock periods
F
H
MICLK4 , 4 ADC1_CLK clock periods
MCM_RDY 7 r Ready Signal for MCM
1)
after Power On or Reset
0
B
MCM Not Ready , Measurement Core Module in
startup phase
1
B
MCM Ready , Measurement Core Module start-up
phase finished
EoC_FAIL 6 r Fail of ADC End of Conversion Signal
0
B
ADC EoC available , End of Conversion Signal was
sent properly by ADC
1
B
ADC EoC not available , End of Conversion Signal
was not sent properly by ADC
RES 5 r Reserved
Always write as 0
EoC_FAIL_CLR 4 w Fail of ADC End of Conversion Signal Clear
0
B
ADC EoC Fail not clear , no clear of EoC_FAIL flag
1
B
ADC EoC Fail clear , Clear of EoC_FAIL flag
RES 3:2 r Reserved
Always read as 0
SW_MODE 1 rw SW Mode Enable
0
B
Software Mode Disable , Sequencer running
1
B
Software Mode Enabled , Sequencer stopped
Field Bits Type Description