Infineon TLE984 QX Series, User Manual

Page: 671 / 972

User Manual 671 Rev. 1.1
2019-03-18
TLE984xQX
Microcontroller with LIN and Power Switches for Automotive Applications
High-Speed Synchronous Serial Interface SSC1/SSC2
21.5.2 Configuration Register
The operating mode of the serial channel SSC is controlled by the control register CON. This register contains
control bits for mode and error check selection, and status flags for error identification. Depending on bit EN,
either control functions or status flags and master/slave control are enabled.
Control Register
Field Bits Type Description
RES 31:4 r Reserved
Always read as 0; should be written with 0.
MIS_1 3 rw Master Mode Input Select Bit 1 (Master Mode only)
0
B
Default , Inputs selected according to MIS_0.
1
B
Do not use , Connects to unused pins.
CIS 2 rw Clock Input Select (Slave Mode only)
0
B
SSCx_S_SCK , (x = 1 or 2, dependant form current SSC),
see Chapter 15.4 .
1
B
SSC12_S_SCK , for both SSCs. See Chapter 15.4 .
SIS 1 rw Slave Mode Input Select (Slave Mode only)
0
B
SSCx_S_MTSR , (x = 1 or 2, dependant form current SSC),
see Chapter 15.4 .
1
B
SSC12_S_MTSR , for both SSCs. See Chapter 15.4 .
MIS_0 0 rw Master Mode Input Select Bit 0 (Master Mode only)
0
B
SSCx_M_MRST , (x = 1 or 2, dependant form current SSC),
see Chapter 15.4 .
1
B
SSC12_M_MRST , for both SSCs. See Chapter 15.4 .
Table 352 RESET of SSC_PISEL
Register Reset Type Reset Values Reset Short Name Reset Mode Note
RESET_TYPE_3 00000000
H
RESET_TYPE_3
SSC_CON Offset Reset Value
Control Register 04
H
see Table 353
31 16
r
RES
15 4
r
RES
33
rw
MIS_
1
22
rw
CIS
11
rw
SIS
00
rw
MIS_
0