IBM SAN32M1, Installation And Service Manual

Page: 450 / 626

SAN32M1 Fabric Switch Installation and Service Manual 418
Description
User attempted to disable these parameters in the Configure Switch
Parameters dialog box with the switch online and Enterprise Fabric
Mode (SANtegrity binding feature) enabled.
Action
Disable Enterprise Fabric Mode through the Enterprise Fabric Mode
dialog box in the EFC Manager, then disable the parameters.
Message
The IPL configuration cannot be deleted.
Description
A user attempted attempted to delete the IPL address configuration.
This operation was not allowed.
Action
Cancel the operation.
Message
The link to the switch is not available.
Description
The link from the EFC Server to the switch is not available.
Action
Check Ethernet connection.
Message
The maximum number of address configurations has been reached.
Description
The maximum number of saved address configurations has been
reached.
Action
Delete configurations no longer needed to allow new configuration to
be saved.
Message
The optical transceiver is not installed.
Description
No information available for a port that is not installed.
Action
Ensure the optical transceiver is installed and fully seated.