IBM SAN32M1, Installation And Service Manual

Page: 338 / 626

SAN32M1 Fabric Switch Installation and Service Manual 306
Procedural notes
NOTE:
EFCM and Element Manager screens in this manual may not match
the screens on your server and workstation. The title bars have been removed
and the fields may contain data that does not match the data seen on your
system.
The following procedural notes are referenced in applicable repair
procedures. The notes do not necessarily apply to all procedures in
the chapter.
1. Before performing a repair procedure, read the procedure
carefully and thoroughly to familiarize yourself with the
information and reduce the possibility of problems or customer
down time.
2. When performing procedures described in this chapter, heed all
WARNING
and CAUTION statements, and other statements
listed in the preface of this manual.
3. After completing steps of a detailed procedure that is referenced
from another procedure, return to the initial (referencing)
procedure and continue to the next step of that procedure.
4. After replacing a FRU, extinguish the System Error light-emitting
diode (LED) on the front of the switch.
Table 14
Factory-Set Defaults
Item Default
Customer password password
Maintenance password level-2
IP address 10.1.1.10
IP address (factory preset) 10.1.1.10
Subnet mask 255.0.0.0
Gateway address 0.0.0.0