IBM SAN32M1, Installation And Service Manual

Page: 505 / 626

473 Appendix B: Event code tables
Event Code: 505
Message: Port module revision not supported
Severity: Minor
Explanation: The specified port hardware module is not supported by the existing firmware. The associated ports will appear
uninstalled to system software.
Action: Ensure that the switch model supports the operating firmware. If the firmware provides support for the indicated
model, perform a data collection operation for this switch using the EFC Manager, saving the data file to the EFC
Server Zip drive. If the problem persists following a system power-on reset, replace the switch and return both the
failing switch and the CD to IBM for analysis and repair.
Event Data: Byte 0 = Slot position
Byte 1 = Reason code:
00 = Unrecognized board ID.
01 = FPM in an intolerant (2-gig) switch.
02 = FPM in an unsupported switch.
Bytes 4-7 = Elapsed millisecond tick count.
Distribution: Switch EFC Server Host
Nonvolatile
System
Event Log
System
Error
Indicator
Event Log E-Mail Call-Home Sense Info Link Incident
✔ ✔