IBM SAN32M1, Installation And Service Manual

Page: 445 / 626

413 Appendix A: Messages
Description
Warning that occurs when configuring the date and time through the
Configure Date and Time dialog box, that the new time or date will
overwrite the existing time or date set for the switch.
Action
Verify that you want to overwrite the current date or time.
Message
Periodic Date/Time synchronization must be cleared before enabling
switch clock alert.
Description
Action cannot be performed because Periodic Date/Time Synchronization
option is active.
Action
Click Periodic Date/Time Synchronization check box in Configure Date and
Time dialog box (Configure menu) to clear checkmark and disable periodic
date/time synchronization.
Message
Port binding was removed from attached devices that are also
participating in Switch Binding.
Description
Informational message. User has removed Port Binding from
attached devices, but one or more of these devices is still controlled
by Fabric Binding.
Action
Review the Switch Binding Membership List to determine if the
devices should be members.
Message
Port cannot swap to itself.
Description
Port addresses entered in the Swap Ports dialog box are the same.
Action
Make sure that address in the first and second port address fields are
different.
Message
Port diagnostics cannot be performed on an inactive port.