![background image](http://html1.mh-extra.com/html/ibm/san32m1/san32m1_installation-and-service-manual_3509578213.webp)
181
Chapter 2: Installation tasks
Figure 114
Configure Panel (Security Page with EFM Tab)
2. Perform one of the following steps as required:
• Click Enable to activate EFM. The message Your changes to
enterprise fabric mode have been successfully activated
appears.
• Click Disable to deactivate EFM. The message Your changes to
enterprise fabric mode have been successfully activated
appears.
Configure OpenTrunking
Perform this procedure to configure OpenTrunking parameters. The
OpenTrunking feature must be installed to access this control. Refer
to
Install PFE Keys (Optional)
on page 184 for instructions. If the
feature is not installed, the message OpenTrunking Feature Not
Installed
appears. To configure OpenTrunking parameters:
1. At the Configure panel, click the Performance tab. The Performance
page displays with the OpenTrunking tab selected (
Figure 115
on
page 182).
i140M099
Summary of Contents for SAN32M1
