IBM SAN32M1, Installation And Service Manual

Page: 190 / 626

SAN32M1 Fabric Switch Installation and Service Manual 158
a. Ensure the browser-capable PC and the Ethernet LAN
segment (with the switch attached) are connected through the
Internet. At the PC, launch the browser application (Netscape
Navigator
or Internet Explorer).
b. At the browser, enter the Internet Protocol (IP) address of the
switch as the Internet uniform resource locator (URL). Use the
default IP address of 10.1.1.10. The Enter Network Password
dialog box displays (
Figure 98 ).
Figure 98
Enter network password dialog box
c. Type the default user name and password.
NOTE: The default SANpilot interface user name is Administrator
and the default password is password. The user name and password
are case-sensitive.
d. Click OK. The SANpilot interface opens with the View panel
open and the Switch page displayed ( Figure 99 ).
i24M1062