IBM SAN32M1 Installation And Service Manual Download Page 435

Page: 435 / 626

403

Appendix A: Messages

Message

Field has exceeded maximum number of characters.

Description

The maximum number of data entry characters allowed in the field
was exceeded.

Action

Enter the information using the prescribed number of characters.

Message

File transfer aborted.

Description

User has stopped the file transfer.

Action

N/A. An informational message.

Message

File transfer is in progress.

Description

Firmware or data collection is being transferred.

Action

N/A. An informational message.

Message

Firmware download timed out.

Description

The switch did not respond in the time allowed. The status of the
firmware install operation is unknown.

Action

Retry the operation. If the problem persists, contact support
personnel.

Message

Firmware file I/O error.

Description

Firmware file input/output error occurred.

Action

Contact support personnel.

Summary of Contents for SAN32M1



















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SAN32M1

Reviews:

Related manuals for SAN32M1

Brands by name

Popular brands

IBM SAN32M1, Installation And Service Manual

Search results

Summary of Contents for SAN32M1

Reviews:

Related manuals for SAN32M1

Brands by name

Popular brands