IBM SAN32M1, Installation And Service Manual

Page: 111 / 626

79 Chapter 2: Installation tasks
3. Press ENTER and the following message appears ( Figure 32 ) with
the default IP address of 192.168.0.1.
Figure 32
LCD panel (LAN 1 IP address)
4. Use the arrow keys as described in step 2 to input a new IP
address, then press ENTER. The following message appears
(
Figure 33 ):
Figure 33
LCD panel (save change)
5. Press ENTER. The LAN 1 IP address changes and the following
message appears ( Figure 34 ) with the default subnet mask of
255.0.0.0 .
Figure 34
LCD Panel (LAN 1 subnet mask)
6. Use the arrow keys as described in step 2 to input a new subnet
mask, then press ENTER. The following message appears
(
Figure 35 ):
Figure 35
LCD panel (save change)
7. Press ENTER. A Wait a moment! message appears at the LCD
panel, the LCD panel returns to the LAN 1 Setting?? message,
and the LAN 1 subnet mask changes.
Input IP:
192.168.000.001
Save Change?
Yes, Save !!
Input Netmask:
255.000.000.000
Save Change?
Yes, Save !!