IBM SAN32M1, Installation And Service Manual

Page: 396 / 626

SAN32M1 Fabric Switch Installation and Service Manual 364
7. Click Yes. When the restore process finishes, the Restore Complete
dialog box displays.
8. Click OK to close the dialog box and return to the Hardware View.
Reset configuration data
NOTE: This procedure resets the switch IP address to the default of 10.1.1.10
and may disrupt server-to-switch communication.
To reset the switch data to the factory default settings:
1. Notify the customer the switch is to be set offline. Ensure the
customer’s system administrator quiesces Fibre Channel frame
traffic through the switch and sets attached devices offline.
2. Set the switch offline ( Set offline state on page 350).
3. At the EFC Server, open the EFC Manager application. The
Product View displays.
4. Select the icon representing the switch for which a configuration
file is to be reset to factory default settings. The Hardware View for
the selected switch displays.
5. At the navigation control panel, select Reset Configuration from the
Maintenance menu. The Reset Configuration dialog box displays.
6. Click Reset. When the reset process finishes, the dialog box closes
and the application returns to the Hardware View.
i3
2M1
095
i32M1096