IBM BladeCenter JS12, Problem Determination And Service Manual

Page: 84 / 318

Table 14. BA000010 to BA400002 Partition firmware SRCs (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, Type 7998,” on page 235 to determine which components are CRUs and which
components are FRUs.
Error code Description Action
BA130010 USB CD-ROM in the media tray: device
remained busy longer than the time-out
period
1. Retry the operation.
2. Reboot the blade server.
3. Troubleshoot the media tray and CD-ROM
drive.
4.
Replace the USB CD or DVD drive.
5.
If the problem persists:
a.
Go to “Checkout procedure” on page
186.
b. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
BA130011 USB CD-ROM in the media tray:
execution of ATA/ATAPI command was
not completed with the allowed time.
1. Retry the operation.
2. Reboot the blade server.
3.
Troubleshoot the media tray and CD-ROM
drive.
4. Replace the USB CD or DVD drive.
5. If the problem persists:
a. Go to “Checkout procedure” on page
186.
b. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
BA130012 USB CD-ROM in the media tray:
execution of ATA/ATAPI command
failed.
1. Retry the operation.
2. Reboot the blade server.
3. Troubleshoot the media tray and CD-ROM
drive.
4.
Replace the USB CD or DVD drive.
5.
If the problem persists:
a. Go to “Checkout procedure” on page
186.
b. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
70
JS12 Type 7998: Problem Determination and Service Guide