IBM BladeCenter JS12, Problem Determination And Service Manual

Page: 46 / 318

Table 12. B200xxxx Logical partition SRCs (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, Type 7998,” on page 235 to determine which components are CRUs and which
components are FRUs.
B200 xxxx Error
Code
Description Action
2054 A problem occurred during a
partition Main Storage Dump. A
mainstore dump IPL did not
complete due to a configuration
mismatch. Go to “Isolating firmware problems” on page 222.
2058 A problem occurred during a
partition Main Storage Dump. A
mainstore dump startup did not
complete due to a copy error. Go to “Isolating firmware problems” on page 222.
2210 Informational system log entry only. No corrective action is required.
2220 Informational system log entry only. No corrective action is required.
2250 During the startup of a partition, an
attempt to toggle the power state of
a slot has failed. Check for server firmware updates; then, install the
updates if available.
2260 During the startup of a partition, the
partition firmware attempted an
operation that failed. Go to “Isolating firmware problems” on page 222.
2300 During the startup of a partition, an
attempt to toggle the power state of
a slot has failed. Check for server firmware updates; then, install the
updates if available.
2310 During the startup of a partition, the
partition firmware attempted an
operation that failed. Go to “Isolating firmware problems” on page 222.
2320 During the startup of a partition, the
partition firmware attempted an
operation that failed. Go to “Isolating firmware problems” on page 222.
2425 During the startup of a partition, the
partition firmware attempted an
operation that failed. Go to “Isolating firmware problems” on page 222.
2426 During the startup of a partition, the
partition firmware attempted an
operation that failed. Go to “Isolating firmware problems” on page 222.
2475 During the startup of a partition, a
slot that was needed for the partition
was either empty or the device in
the slot has failed. Check for server firmware updates; then, install the
updates if available.
2485 During the startup of a partition, the
partition firmware attempted an
operation that failed. Go to “Isolating firmware problems” on page 222.
3000 Informational system log entry only. No corrective action is required.
3081 During the startup of a partition, the
startup did not complete due to a
copy error. Check for server firmware updates; then, install the
updates if available.
32
JS12 Type 7998: Problem Determination and Service Guide