IBM BladeCenter JS12, Problem Determination And Service Manual

Page: 40 / 318

Table 10. AA00E1A8 to AA260005 Partition firmware attention codes (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, Type 7998,” on page 235 to determine which components are CRUs and which
components are FRUs.
Attention code Description Action
AA00E1B1 Waiting for the user to accept or decline
the license
1. Check for server firmware updates.
2. Apply any available updates.
3. If the problem persists:
a. Go to “Checkout procedure” on page
186.
b.
Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
AA060007 A keyboard was not found. Verify that a keyboard is attached to the USB
port that is assigned to the partition.
AA06000B The system or partition was not able to
find an operating system on any of the
devices in the boot list.
1. Use the SMS menus to modify the boot list
so that it includes devices that have a
known-good operating system and restart
the blade server.
2. If the problem remains, go to “Boot
problem resolution” on page 193.
AA06000C The media in a device in the boot list
was not bootable.
1. Replace the media in the device with
known-good media or modify the boot list
to boot from another bootable device.
2. If the problem remains, go to “Boot
problem resolution” on page 193.
AA06000D The media in the device in the bootlist
was not found under the I/O adapter
specified by the bootlist.
1. Verify that the media from which you are
trying to boot is bootable or modify the
boot list to boot from another bootable
device.
2. If the problem remains, go to “Boot
problem resolution” on page 193.
AA06000E The adapter specified in the boot list is
not present or is not functioning.
v
For an AIX operating system:
1. Try booting the blade server from
another bootable device; then, run AIX
online diagnostics against the failing
adapter.
2. If AIX cannot be booted from another
device, boot the blade server using the
stand-alone
Diagnostics CD or a NIM
server; then, run diagnostics against the
failing adapter.
v
For a Linux operating system, boot the blade
server using the stand-alone
Diagnostics CD
or a NIM server; then, run diagnostics
against the failing adapter.
26
JS12 Type 7998: Problem Determination and Service Guide