IBM BladeCenter JS12, Problem Determination And Service Manual

Page: 151 / 318

Table 20. D1001xxx to D1xx3FFF dump codes (continued)
v
If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, “Parts listing, Type 7998,” on page 235 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
D1381xxx Invalidate the dump
1. Go to “Checkout procedure” on page 186.
2. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis assembly”
on page 274.
D1391xxx Check for valid dump sequence
1.
Go to “Checkout procedure” on page 186.
2. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis assembly”
on page 274.
D13A1xxx Get dump identity sequence
1. Go to “Checkout procedure” on page 186.
2. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis assembly”
on page 274.
D13B1xxx Get dump length sequence
1. Go to “Checkout procedure” on page 186.
2. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis assembly”
on page 274.
D1FF1xxx Dump complete
1. Go to “Checkout procedure” on page 186.
2. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis assembly”
on page 274.
D1xx3000 - D1xx3FFF Platform dump status codes are described in “D1xx3y01 to D1xx3yF2 Service processor
dump codes” on page 138
Chapter 2. Diagnostics
137