iManager NetEco 6000
Device Installation and Commissioning Guide
8 FAQ
Issue 03 (2019-03-10)
Copyright © Huawei Technologies Co., Ltd.
306
Figure 8-11
Setting the SNMPv3 parameters
Any characters complying with the system can be entered for
User Name
,
MD5/SHA Password
,
and
DES/AES Password
. Record the specified parameters as you will need them when setting up
the ECC500 V6 collector on the NetEco.
SHA and AES passwords are recommended. MD5 and DES are insecure encryption algorithms.
MD5/SHA Password
and
DES/AES Password
need to be set to different passwords.
3.
Click
Add
in
SNMP Trap
, set
Trap Target Address
and
Trap Port
and select
SNMP
Version
. Set
Trap Target Address
to the IP address of the NetEco server, enter
162
for
Trap Port
, select
SNMPv3
for
SNMP Version
, and select
SNMPv3 User Name
. Then,
click
Confirm
.
Figure 8-12
Setting the SNMP Trap parameters
Step 2
Set A8802RS access controller parameters on the ECC500.
1.
Click
Monitoring
on the main menu, select the expansion card connected to the
A8802RS access controller, and set parameters for the connected COM port, as shown in