iManager NetEco 6000
Device Installation and Commissioning Guide
6 Adding Devices
Issue 03 (2019-03-10)
Copyright © Huawei Technologies Co., Ltd.
223
Procedure
Step 1
Choose
Configuration
>
Configuration Management
>
Access Control Management
from the main menu. The
Access Control Management
window is displayed.
Step 2
Click
Create
on the
Access Controllers List
tab page.
The
Data Center Planning
page is displayed.
Step 3
Add an access controller to the
Data Center Planning
page.
1.
Select the management domain to add a device.
2.
In the lower-left corner of the page, click the
Device
tab.
3.
Click the drop-down list box in
Type
and select
Access Controller
4.
Select an access controller and drag its icon to the management domain.
To delete a device, click the device and choose
Delete
under
.
5.
The A8802RS access controller shown in
Figure 6-76
Setting access controller parameters
