![background image](http://html.mh-extra.com/html/hp/8112a/8112a_operating-programming-and-servicing-manual_163950039.webp)
Power Cable
Warning
To avoid the possibility of injury or death, the following precautions
must be followed before the instrument is switched on:
•
If the instrument is to be energized via an auto transformer for
voltage reduction, ensure that the Common terminal is connected to
the grounded pole of the power source
•
The power cable must only be inserted into a socket outlet provided
with a protective ground contact. The protective action must not
be negated by the use of an extension cord without a protective
conductor.
•
Before switching on the instrument, the protective ground terminal
of the instrument must be connected to the protective conductor of
the power cable. This is verified by using the power cord which is
supplied with the instrument.
•
Intentional interruption of the protective ground connection is
prohibited.
In accordance with international safety standards, the HP 81 12A
is equipped with a three-wire power cable. When connected to an
appropriate ac power receptacle, this cable grounds the instrument
cabinet . The type of cable shipped with each instrument depends on
the country of destination. Refer to Figure 3-2 for the part numbers
of the available cables.
Australia
8 120-1369
South Africa
8120-4211
Denmark
8120-2956
�
Switzerland
8120-2104
Europe
812 0-1689
United States
120V
8120-1378
Great Britain
8120-13151
Japan
120V
8120-4753
Figure
3-2.
Power Cables
&
Plug Identification
Installation
3-3
Summary of Contents for 8112A
