HP 8112A, Operating, Programming And Servicing Manual

Page: 25 / 406

Introduction
General
Instruments Covered
by This Manual
This manual describes the following procedures for the HP 81 12A
50 MHz Programmable Pulse Generator:
•
Installation
•
Operating
•
Programming
•
Testing Performance
•
Adjustment
•
Servicing
A Microfiche version of this manual is available on 4
x
6 inch
microfilm transparencies (refer to title page for order number) .
The microfiche package also includes the latest Manual Changes
supplement and all relevant Service Notes.
HEWLETT-PACKARD GmbH
Boeblingen Fed. Rep. of Germany
Figure 1·1. Serial Number Plate (FRG)
1
Attached to the rear of the instrument is a serial number plate
(Figure 1-1). The first four digits only change when there is a
significant modification to the instrument, the last five digits are
assigned sequentially to instruments.
This manual applies directly to
the instruments with the serial numbers quoted on the title page.
For
instruments with higher serial numbers, refer to the Manual Change
sheets in Appendix C
Updating.
To keep this manual up-to-date,
Hewlett-Packard recommends that you periodically request the
latest Manual Change supplement by quoting the part-number and
print-date of this manual, both of which appear on the title page.
Introduction 1·1