HTTP/HTTPS
W
EB
GUI
–
W
EB
B
ROWSER
C
ONFIGURATION
I
NTERFACE
8029HEPTA-V2/GPS GPS - NTP Time Server with LAN Interface - V08.00
104 / 130
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
8.3.6.12 H8 Firmware Update (Sync Source)
Patches and Bug Fixes are provided for the Time Server 8029HEPTA/GPS by means of
updates.
The H8 update of the Sync Source is loaded only via the web interface in the Time Server
8029HEPTA/GPS (log in as “master” user required). See also
Chapter 4.4 Firmware Update
The following points should be considered regarding updates:
•
Only experienced users or trained technical personnel should carry
out a board update after checking all necessary preconditions.
•
Important:
Faulty updates
or
update attempts
may, under certain
circumstances, require the module to be returned to the factory for
repair at customer’s expense.
•
Is the update on hand suitable for the module? If there are any
doubts please consult the support of the
hopf
company.
•
In order to guarantee a correct update, the "
New version of saved
site
" function must be set to "
On each access to the site
" on the
Internet browser used.
•
During the update procedure, the device
must not be switched off
not
settings be saved to the flash memory
!
•
Updates are
always
carried out as Software SETs. That means that
all programmes included in the SET must be downloaded to the
system.
•
For the update pay attention to point described in
Chapter 4.4
In order to carry out an update, enter the name and the folder in which the update / firmware
image is located in the text field or open the file selection dialogue by pressing the "Browse"
button.
A correct image designation is (e.g.):
8024_128_v0400.
mot
for
H8 Firmware
(Update takes approx. 1-1.5 minutes)
