hopf 8029HEPTA-V2/GPS Technical Manual Download Page 87

Page: 87 / 130

HTTP/HTTPS

GUI

–

ROWSER

ONFIGURATION

NTERFACE

8029HEPTA-V2/GPS GPS - NTP Time Server with LAN Interface - V08.00

87 / 130

hopf

Elektronik GmbH

Nottebohmstr. 41

• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]

8.3.5.4 Restarting the Module (Reboot Device)

The restart concerns the Module 8029HEPTA and the Sync Source (here
Module 8024GPS).

All settings

not

saved with "

Save

" are lost on reboot (see

Chapter 8.2.3

Enter or Changing Data

Moreover the

NTP service

implemented in the system is restarted. This leads to a renewed

alignment phase with the loss of the stability and accuracy reached up to this point.

Chapter 8.2.1

LOGIN and LOGOUT as User

Press the "

Reboot now

" button and wait until the restart has been performed.

Summary of Contents for 8029HEPTA-V2/GPS



































































































































Search results

Summary of Contents for 8029HEPTA-V2/GPS

Reviews:

Related manuals for 8029HEPTA-V2/GPS

Brands by name

Popular brands

hopf 8029HEPTA-V2/GPS, Technical Manual

Search results

Summary of Contents for 8029HEPTA-V2/GPS

Reviews:

Related manuals for 8029HEPTA-V2/GPS

Brands by name

Popular brands