hopf 8029HEPTA-V2/GPS Technical Manual Download Page 80

Page: 80 / 130

HTTP/HTTPS

GUI

–

ROWSER

ONFIGURATION

NTERFACE

8029HEPTA-V2/GPS GPS - NTP Time Server with LAN Interface - V08.00

80 / 130

hopf

Elektronik GmbH

Nottebohmstr. 41

• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]

A new server key and certificate can be generated by pressing the "Generate now" button.

Generate now

This should be carried out regularly as these keys are only valid for one
year.

If the Time Server 8029HEPTA/GPS is to form part of an NTP trust group, a group key can be
defined and uploaded with the "Upload now" button.

Detailed information about the NTP Autokey scheme can be found in the NTP documentation
(

http://www.ntp.org/

Changes in data do not take effect immediately after clicking on the
“Apply” symbol. The NTP service MUST also be restarted (see

Chapter

8.3.3.6 Restart NTP

Summary of Contents for 8029HEPTA-V2/GPS



































































































































Search results

Summary of Contents for 8029HEPTA-V2/GPS

Reviews:

Related manuals for 8029HEPTA-V2/GPS

Brands by name

Popular brands

hopf 8029HEPTA-V2/GPS, Technical Manual

Search results

Summary of Contents for 8029HEPTA-V2/GPS

Reviews:

Related manuals for 8029HEPTA-V2/GPS

Brands by name

Popular brands