LCD-D
ISPLAY WITH
P
USHBUTTON
–
F
UNCTION
8029HEPTA-V2/GPS GPS - NTP Time Server with LAN Interface - V08.00
37 / 130
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
7.2.2 Standard Display Image with valid Time
Example image for the standard display after a system start with valid backup information or
after manual input of the time information via the WebGUI:
U T C 1 6 : 2 5 : 5 8 G P S S Y S T E M - S T A T U S : S Y N C
T U 1 2 / J A N / 2 0 1 6 T : 0 7 N T P : S T R A T U M 0 1 / H I G H
Time Information:
LOC
10:25:19 /D
Display with the setting:
local time
.
•
D for summertime (Daylight-Saving Time)
•
S for standard time (wintertime)
UTC
08:25:19
Display with the setting:
UTC time
.
MO - TU - WE - TH -
FR - SA - SU
Display with the
Weekday
in abbreviations:
complies
with
MONDAY
– SUNDAY
12/JAN/2016
Display of date:
Day / Abbr. of Month / Year
It can be switched between UTC and local time as time basis for the display
by using the button.
Therefore the pushbutton must be pressed for 5 seconds.
GPS Information:
The number of the currently and actually received satellites is shown here. If the value drops
under "04" the value starts flashing.
In the GPS reception mode "3D" at least 4 satellites for the synchronization
need to be received.
System-Status:
SYNC
Time synchr Quartz regulation started/running
SYOF
Time synchr SyncOFF running
SYSI
Time synchronized as simulation mode
(without actual GPS reception)
QUON
Quartz/Crystal time + SyncON running
QUEX
Quartz/Crystal time (in freewheel after synchronization failure
Board was already synchronized)
QUSE
Quartz/Crystal time after reset or manual setting
INVA
Invalid time
NTP-Status:
The current Stratum and accuracy value of the NTP service is shown here.
