Honeywell SmartPAC 2, User Manual, Page: 32 / 522

1126800 SmartPAC 2 with WPC Integration
Page 10 Chapter 1 Introduction to SmartPAC 2
are reached. The total hits counter counts all hits on a tool, and keeps track of the last
recorded number for the previous job. With the optional Advanced counter mode, you
can set up the good parts counter to give an accurate parts count when multiple parts are
produced at each stroke or when multiple strokes are required to produce one part.
• Reset SmartPAC 2 . You reset the unit after SmartPAC 2 stops the press when a
malfunction is detected. SmartPAC 2 gives you specific fault messages for a malfunction,
which makes it easy to troubleshoot. See Chapter 7 for a complete description of errors.
• Review recent errors. SmartPAC 2’s Error/event Log feature displays the 100 most
recent errors that caused the press to stop and events such as tool changes, along with the
date, time and stroke count at which the event occurred. You can easily view the Error
Log from the Run menu at any time. It lists the error code along with the stroke count
and crankshaft angle when the error occurred.
SmartPAC 2 with DiProPAC
•
Set timing sensor inputs
. You can monitor up to 16 sensors to detect malfunctions
such as stock buckling, misfeeds, die overload, and improper part ejection.
SmartPAC 2 with ProCamPAC
• Set timing for cam channels. You can activate your feed pilot release, assembly
operations, air cylinders, transfer devices, lubricators, air blow-off, cut off,
loader/unloader controls and other equipment that requires precise timing with the press.
And you can assign a name to each cam channel.