Honeywell Rapid Eye Administrator'S Manual Download Page 37

Page: 37 / 294

Rapid Eye Multi-Media DVR System Administrator Guide

Document 800-02953V4 Rev A

03/10

Figure 2-4

Report of a Dynamic IP Assigned by DHCP

Updating a Site

Double-click a site name. The Update Site dialog appears.

Renaming a Site

Enter a name in the Site Name box, as needed.

Click Save and Close. This updates the name of the Rapid Eye unit on the Sites tab in
the View software.

Note

For connections using DHCP, a different site name is shown on the System
tab of a

Maintenance Session

. Do not change that site name; it serves a

different purpose. See

Dynamic Host Configuration Protocol

, page

Deleting a Site

Deleting a site in the Multi central database has no effect on the Rapid Eye unit. The unit
continues to record video, send alarms, and so on.

The site name on the
System tab can differ
from the site name in a
site definition.

Summary of Contents for Rapid Eye







































































































































































































































































































Search results

Summary of Contents for Rapid Eye

Reviews:

Related manuals for Rapid Eye

Brands by name

Popular brands

Honeywell Rapid Eye, Administrator'S Manual

Search results

Summary of Contents for Rapid Eye

Reviews:

Related manuals for Rapid Eye

Brands by name

Popular brands